Discuz! Board

标题: 请教几种广播模式的分别 [打印本页]

作者: ldcung    时间: 2015-11-15 22:13
标题: 请教几种广播模式的分别
小弟刚接触蓝牙,还请大神解释一下这几种广播模式有什么具体的分别
typedef enum
{
    BLE_ADV_EVT_IDLE,                /**< Idle; no connectable advertising is ongoing.*/
    BLE_ADV_EVT_DIRECTED,            /**< Direct advertising mode has started. */
    BLE_ADV_EVT_DIRECTED_SLOW,       /**< Directed advertising (low duty cycle) has started. */
    BLE_ADV_EVT_FAST,                /**< Fast advertising mode has started. */
    BLE_ADV_EVT_SLOW,                /**< Slow advertising mode has started.*/
    BLE_ADV_EVT_FAST_WHITELIST,      /**< Fast advertising mode using the whitelist has started. */
    BLE_ADV_EVT_SLOW_WHITELIST,      /**< Slow advertising mode using the whitelist has started.*/
    BLE_ADV_EVT_WHITELIST_REQUEST,   /**< Request a whitelist from the main application. For whitelist advertising to work, the whitelist must be set when this event occurs. */
    BLE_ADV_EVT_PEER_ADDR_REQUEST    /**< Request a peer address from the main application. For directed advertising to work, the peer address must be set when this event occurs. */
} ble_adv_evt_t;
不胜感激!!!!

作者: admin    时间: 2015-11-17 11:41
可以看下我的抓包说明里有个广播包类型[attach]1144[/attach]
作者: 330713927    时间: 2015-12-16 16:18
admin 发表于 2015-11-17 11:41
可以看下我的抓包说明里有个广播包类型

QF,蓝牙应用篇中怎么没有beacon实验的讲解啊。
实验中广播的UUID ,Major,minor,rssi。这些数据可以任意指定?只是为了应用而设定特俗含义的数值而已?




欢迎光临 Discuz! Board (http://www.qfv8.com/) Powered by Discuz! X3