HUANG 发表于 2015-9-7 22:56:50

各位请教一下，开始学STM8，不理解0xA0这样的地址的如何设置的

GPIO_MODE_OUT_OD_LOW_FAST= (uint8_t)0xA0,/*!< Output open-drain, low level, 10MHz */
GPIO_MODE_OUT_PP_LOW_FAST= (uint8_t)0xE0,/*!< Output push-pull, low level, 10MHz */
GPIO_MODE_OUT_OD_LOW_SLOW= (uint8_t)0x80,/*!< Output open-drain, low level, 2MHz */
GPIO_MODE_OUT_PP_LOW_SLOW= (uint8_t)0xC0,/*!< Output push-pull, low level, 2MHz */
GPIO_MODE_OUT_OD_HIZ_FAST= (uint8_t)0xB0,/*!< Output open-drain, high-impedance level,10MHz */
GPIO_MODE_OUT_PP_HIGH_FAST = (uint8_t)0xF0,/*!< Output push-pull, high level, 10MHz */
GPIO_MODE_OUT_OD_HIZ_SLOW= (uint8_t)0x90,/*!< Output open-drain, high-impedance level, 2MHz */
GPIO_MODE_OUT_PP_HIGH_SLOW = (uint8_t)0xD0

admin 发表于 2015-9-9 14:41:44

官方芯片手册里芯片做的时候就分配的地址
页: [1]
查看完整版本: 各位请教一下，开始学STM8，不理解0xA0这样的地址的如何设置的